OPS75

Oven Panel System

Let’s Discuss your application needs

Key Features & Benefits

Key Feature Out of autoclave. High class finish with reduced pre-paint preparation

Application Automotive body panels with excellent retained surface finish once environmentally cycled

Initial Cure Temp 65°C- 130°C

Initial Cure Time Consult Data Sheet Hours

Post Cure Option No

Outlife 21 - see handling guide days at 20°C

TG Onset* 140°C -DMA

TG Peak* 160°C -DMA

Toughened Yes

Cure Autoclave and Oven

Availability All sites

OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement.

Why choose this material

OPS75 delivers expectional surface finish components from out of autoclave processing. Post-processing steps are minimised.

Supplied with SHD's renowned service, including:

Short two-week lead times and low MOQs
Exceptional product quality
First class technical support
Excellent customer service
The same manufacturing equipment and processes across all sites

Automotive

World-class performance with unmatched premium aesthetics for prestigious supercar and hypercar brands

Find out more

Technical Guidance Information

This material should be kept frozen at -18°C (0°F). It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.

This material contains epoxy resin which can cause allergic reactions with skin contact and must avoid repeated and prolonged skin contact.

Please refer to the product Safety Data Sheet before using this material. The following precautions must be taken when using epoxy resin prepregs:

Overalls must be worn
Impervious gloves must be worn
Curing schedule is meant to be as a guide only and is subject to local conditions
To avoid exotherm, particular care must be taken with thick laminates
Ramp rates must not exceed 3.0°C (5.4°F)/min during initial cure and 0.3°C (0.5°F)/min during post cure