SHD Composites

Epoxy prepreg

LTC210-1

Epoxy Carbon / Glass Tooling

Let’s Discuss your application needs

Key Features & Benefits

Key Feature Lower viscosity, higher tack compared to LTC210

Application COMMERCIAL LOW TEMP TOOLING

Initial Cure Temp 45°C- 70°C

Initial Cure Time 40 Hours- 4 Hours

Post Cure Option yes

Outlife 4 days at 20°C

TG Onset* 204°C -DMA

TG Peak* 225°C -DMA

Toughened No

Cure Autoclave

Availability All sites

LTC210-1 prepreg is designed to cure at low temperatures whilst giving the potential for high temperature tooling. It is a lower viscosity, higher tack variant of our LTC210 system. Typical initial cure cycles are 24 hrs at 45°C (113°F) or 10 hrs at 55°C (131°F), followed by a 200°C (392°F) post cure. LTC210-1 can be supplied on a variety of fabrics to meet your cost and manufacturing requirements.

Why choose this material

LTC210-1 offers the same as LTC210 but with a lower viscosity tailored to suit your application. Available from all SHD sites in the UK, US and Europe.

Supplied with SHD's renowned service, including:

Short two-week lead times and low MOQs
Exceptional product quality
First class technical support
Excellent customer service
The same manufacturing equipment and processes across all sites

Advanced composite solution for Motorsport

Advanced composite solutions for aerospace (passenger plane seating)

SHD support a number of markets, including Marine, Sport and Leisure, Defence, Industrial and Rail.

Motorsport Automotive Aerospace Defence Tooling Sustainability Other Sectors

Motorsport

SHD Composites is the advanced prepreg partner behind winning race teams

Find out more

Automotive

World-class performance with unmatched premium aesthetics for prestigious supercar and hypercar brands

Find out more

Aerospace

Advanced composites specified across major commercial aircraft today

Find out more

Defence

SHD Composites is actively working on many defence programs with customers around the world

Find out more

Tooling

A tool for every geometry, a material for every tool

Find out more

Sustainability

Our enhanced sustainability product range has applications in all our key sectors including Aerospace, Automotive, Motorsport, Marine and Sport & Leisure.

Find out more

Other Sectors

Our products can be applied to a variety of markets, and this range of applications will always remain important for SHD.

Find out more

Technical Guidance Information

This material should be kept frozen at -18°C (0°F). It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.

This material contains epoxy resin which can cause allergic reactions with skin contact and must avoid repeated and prolonged skin contact.

Please refer to the product Safety Data Sheet before using this material. The following precautions must be taken when using epoxy resin prepregs:

Overalls must be worn
Impervious gloves must be worn
Curing schedule is meant to be as a guide only and is subject to local conditions
To avoid exotherm, particular care must be taken with thick laminates
Ramp rates must not exceed 1.0°C (2.0°F)/min during initial cure and 0.3°C (0.5°F)/min during post cure