CEM160 Cyanate Ester Prepreg | High Temperature Performance

CEM160 is a cyanate ester prepreg designed to cure at medium temperatures, whilst producing durable components with excellent high temperature performance. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

Why choose this material

Optimised for higher temperature UD materials. CEM160 also offers good dielectric properties.

Supplied with SHD's renowned service, including:

Short two-week lead times and low MOQs
Exceptional product quality
First class technical support
Excellent customer service
The same manufacturing equipment and processes across all sites

Technical Guidance Information

This material should be kept frozen at -18°C (0°F). It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.

Important Note

If bags are opened before fully cured, condensation may form on the material. Cyanate ester prepregs may react with moisture, which can affect the curing reaction and cause voidage. Great care must be taken to avoid contact with water. Thoroughly dry all tooling and fixtures before commencing lay-up.

This material contains epoxy resin which can cause allergic reactions with skin contact and must avoid repeated and prolonged skin contact.

Please refer to the product Safety Data Sheet before using this material. The following precautions must be taken when using epoxy resin prepregs:

Overalls must be worn
Impervious gloves must be worn
Curing schedule is meant to be as a guide only and is subject to local conditions
To avoid exotherm, particular care must be taken with thick laminates
Ramp rates must not exceed 1.0°C (2.0°F)/min during initial cure and 0.3°C (0.5°F)/min during post cure